收藏本站
96
JACKS AND PLUGS
ENCLOSED JACKS PHONE: 773 792-2700
* Please visit the product pages on our website for the most up-to-date product information
1/4" ENCLOSED TELEPHONE JACKS
Series M11*
Series MNS11*
Series MS11*
Series MN11*
SERIES M113 AND M114 HI-D JAX
Compactly constructed jacks permit direct cross-patching
with Switchcraft, WEco and MIL-type telephone plugs and
patch cords. Series M Hi-D Jax ? offer a choice of solder lugs
or PC terminals. Both insulated and metal bushings can be
specified, as well as .21" inside diameter sleeves for narrow
plug fingers. Maximum contact resistance is .1 ohm. Springs
are made of a special gold-plated copper alloy. Welded cross
bar gold alloy contacts are available on special order.
SERIES M-11* HI-D JAX ?
Two- and 3-conductor type mate with .25" diameter finger
plugs. Tip and ring springs are gold-plated. Shunts (if used)
have welded crossbar palladium contacts. Ring springs
(where used with shunts) have welded crossbar palladium
contacts. Tip springs (when used) do not have a contact
welded to the spring. Bushing has 3/8-32-NEF-2 thread;
locknut and flat washer for mounting are supplied.
SERIES MN-11* HI-D JAX ?
Same as Series M-11* except threaded bushing is molded
thermoplastic for insulated mounting. Continuous sleeve
contact assures positive sleeve connection without exposed
metal on front of panel.
?
The versatile 3-conductor M113 and M114 feature springs
which accept a wide variety of 1/4" plug designs. Self-aligning
PC terminals allow for easier insertion into a printed circuit
board. Also feature a metric thread mounting.
SPECIFICATIONS
MATERIALS
Mounting Bushing: Series M11*, MS11* - Nickel-plated
copper alloy. Series MN11*, MNS11* - Molded thermoplastic.
Housing: Molded thermoplastic, UL 94V-0.
Springs: Copper alloy.
Contacts (mil-type): Tip and Ring Springs are gold-plated.
Shuntsprings (where used) are welded crossbar palladium.
Welded crossbar gold alloy contacts are available on
special order.
Contacts (commercial): Tin-plated integral contacts.
Sleeve Terminal: Steel, tin-plated.
Hardware: Supplied with one P10001 copper alloy,
nickel-plated locknut and one S10221 steel,
nickel-plated washer.
MECHANICAL
Life: 10,000 insertion/withdrawal cycles, minimum.
Insertion/Withdrawal Forces: Nominal plug retention on
2-conductor jack is .75 pounds with .5 pounds minimum.
Nominal plug retention on 3-conductor jack is 2 pounds with
1.5 pounds minimum. With double tips, the nominal is
1.5 pounds and 1 pound minimum.
Maximum Recommended Mounting Torque: 6" -lb. for
thermoplastic bushing.
Mounting Torque (for Spring Lock PC Terminal):
8" -pound for thermoplastic bushings.
ELECTRICAL
Contact Resistance: .020 ohms maximum (initial),
.050 ohms maximum (after humidity, durability exposure).
Per MIL-STD-202E.
Insulation Resistance: 10,000 M ? minimum (initial),
1,000 M ? minimum (after humidity).
Dielectric Withstanding Voltage: 500 V, 60 Hz (rms) AC.
Contact Rating: 0.25, 48 VDC make and break, 3A carry only.
ENVIRONMENTAL
Thermal Range: -55°C to +85°C (non-operating);
-20°C to +65°C (operating).
Thermal Shock: Per MIL-STD 202, method 107.
Humidity: Per MIL-STD 202, method 106.
Salt Spray: Per MIL-STD 202, method 101.
DIMENSIONS ARE FOR REFERENCE ONLY
www.switchcraft.com
Inch
(mm)
? Registered trademark of Switchcraft, Inc.
Note: Contact your Switchcraft Representative for price and delivery
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
5026N-36 BANTAM PLUG/2 ALLIGATOR CLIP 36"
50475C CHOKE COMMON MODE 4.7MH 0.4A SMD
5051 BNC FEMALE TO #8 SPADE LUGS
5053-60-2 MICROGRABBER/BANANA PLUG 60" RED
505 DIGITAL PHOTO/CONTACT TACHOMETER
5069 BNC FEMALE-.025" PIN RECEPT 7"
50J1066 WASHER NON-TURN 1/8"
50J5092 STOP PIN FOR 50 AND 51 SERIES
相关代理商/技术参数
50212LX 功能描述:滑动开关 4PDT SLIDE SWITCH RoHS:否 制造商:C&K Components 触点形式:SPDT 开关功能:Momentary 触点额定值: 端接类型: 执行器:Extended, Side 安装风格:SMD/SMT 触点电镀:Silver 封装:
5021-2P 功能描述:工业控制变压器 240V 0-240/0-280Vout 120Vin 0-280Vout 56A RoHS:否 制造商:Sola/Hevi-Duty 功率额定值: 初级电压额定值:120 V to 240 V 次级电压额定值:24 V 安装风格:Chassis 一次绕组:Dual Primary Winding 二次绕组:Single Secondary Winding 长度:3.89 in 宽度:4.5 in 高度:4.48 in
5021-2S 功能描述:工业控制变压器 480V 0-480/0-560Vout 240Vin 0-560Vout 28A RoHS:否 制造商:Sola/Hevi-Duty 功率额定值: 初级电压额定值:120 V to 240 V 次级电压额定值:24 V 安装风格:Chassis 一次绕组:Dual Primary Winding 二次绕组:Single Secondary Winding 长度:3.89 in 宽度:4.5 in 高度:4.48 in
50213001J 制造商:TEKTRONIX INC. 功能描述:
50-2-13001J 制造商: 功能描述: 制造商:undefined 功能描述:
502134 功能描述:手工工具 Wire-Wrap 24 AWG Bit Std 3.30" x .45" RoHS:否 制造商:Molex 产品:Extraction Tools 类型: 描述/功能:Extraction tool
502134-1 功能描述:光纤连接器 OVEN CURING ASSY W/ADAPTER BLOCK RoHS:否 制造商:Molex 产品:Adapters 类型:8 Port with External Shutter 连接器类型:Adapter 模式:Multimode 光纤直径: 颜色:Blue 附件类型:LC Adapter
502134-2 功能描述:光纤连接器 OVEN ASSY, HEAT CURE, OPT. RoHS:否 制造商:Molex 产品:Adapters 类型:8 Port with External Shutter 连接器类型:Adapter 模式:Multimode 光纤直径: 颜色:Blue 附件类型:LC Adapter